New Items

Product Details:

Perfluoroelastomer (FFKM/FFPM) parts resist over 1,800 different chemicals, including concentrated nitric acid, sodium hydroxide, ethylene diamine and steam while offering the high temperature stability of PTFE (327°C).

Product Details:

 FEP has a very good resistance to almost all chemicals. Besides that, FEP can handle high temperatures up to 204 °C and is not effected by UV radiation.

This unique combination of properties make FEP often suitable as gasket or seal especially in high demanding surroundings.

Magnetic Level Indicators gives continuous level measurement, Indication and control of liquids. These are reliable and efficient indicators for High pressure & High temperature Applications- Up to 250 Bar & 400°C respectively. Remote transmission of data along with Permanent local indication without external power supply makes MLI a go to product for any application in any operating environment.

• The MLI’s are designed as per ASME/ANSI/DN standards
• Various versions of MLI for Chemical applications, Interface level measurement, Thermal Insulation, Steam Tracing, Accumulators applications, Top mounted designs are available

Product Details:

Due to its excellent resistance to petroleum products, and its ability to be compounded for service over a temperature range of -35°C to +120°C (-30°F to +250°F), Nitrile /NBR is the most widely used elastomer in the seal industry today. Also many military rubber specifications for fuel and oil resistant O-rings require nitrile based compounds.

It should be mentioned that to obtain good resistance to low temperature, it is often necessary to sacrifice some high temperature resistance. Nitrile compounds are superior to most elastomers with regard to compression set, tear, and abrasion resistance.

Product Details:

EPDM has a great acceptance in the sealing world because of its excellent resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight (UV). These compounds also withstand the effect of brake fluids and Skydrol" and other phosphate ester-based hydraulic fluids. EPDM compounds are not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments.

Product Details:

HNBR is resistant to mineral oil-based hydraulic fluids, animal and vegetable fats, diesel fuel, ozone, sour gas, dilute acids and bases. HNBR also resists new bio-oils (biological oils). HNBR is suitable for high dynamic loads and has a good abrasion resistance. HNBR is suitable for temperatures from -30°C to +150°C (-20°F to +302°F).

Product Details:

Fluorocarbon O-rings should be considered for use in aircraft, automobile and other mechanical devices requiring maximum resistance to elevated temperatures and to many fluids. FKM (FPM, Viton^®, Fluorel^®) resist mineral oils and greases, aliphatic, aromatic and also special chlorinated hydrocarbons, petrol, diesel fuels, silicone oils and greases. It is suitable for high vacuum applications. Many fluorocarbon compounds have a higher than normal mold shrinkage rate, molds for fluorocarbon products are often different from molds for Nitrile.

Product Details:

Silicone O-Rings have very good low & high temperature resistance. Because they do not give out any odour or taste, the food & medical industries prefer this polymer as in many of their machineries the food products and medicines come in contact with the rubber.

Silicone O-Rings are resistant to ozone, UV radiation, some oils, brake fluids & hot air. Vacuum applications like the hot air oven utilise silicone O-Rings & Gaskets for sealing purpose because of the above qualities.