High Purity Metal

Product Details:

EN24 round bar is a actual high power steel alloy which is tough and hardened before supplying and has nickel, chromium, molybdenum making it high ductile steel power, with decent ductility and attire resistance. EN24 round bars have decent internal power and high exterior strength, which brands it extremely wear resistant. EN24 square bar is a nickel chromium molybdenum mixture which provides great ductile steel strength, with wear resistance features and good ductility.EN24 is also appropriate for a variety of raised temperature requests, With comparatively good influence properties at low temperatures whereas EN24 steel round bar proposal good mixture of ductility, power and attire resistance.

Product Details:

Also referred to as any of the following designations, 708M40 or 709M40 and AISI 4140 the en19 hex bar could be either treated in the annealed as rolled or the en19 steel round bar could be supplied in the T condition.

Commonly, the en9 rod is supplied in an as rolled condition. Since the alloy could be hardened by either a flame or an induction process, the surface hardness value obtained is high. Which means the hardness value of en9 black bar ranges between 180 HB to 230 HB.  For a carbon steel alloy, the en9 square bar is a grade that exhibits excellent wear resistance properties. In comparison to some stainless steel grades, the en 9 material rate is lower due to low alloying cost.  Click here to view the en9 material price in India.

Product Details:

Considered to ve a very popular alloy, this low carbon-manganese free cutting steel has a significant content of silicon in its en45 chemical composition. Referred to as spring steel, the EN 45 Spring Steel Round Bar is normally supplied an untreated and cold finished condition.

En45 Chemical Composition, Get EN 45 Spring Steel Round Bar, EN45 Alloy Steel Rods

Product Details:

En9 round bar is also known by its trade name  070M55. The carbon content in the alloy of an en9 bright bar ranges between 0.5 – 0.6%, thus making this grade a medium carbon steel alloy. The tensile strength of the en9 steel rod could be developed between 500 Mpa – 800 Mpa.

Product Details:

The CS AISI / SAE 52100 Round Bars are often referred to as bearing steel. The chemistry of SAE 52100 Round Bar is a high carbon, chromium containing one. Belonging to a low alloy steel category, the AISI 52100 Alloy Steel Round Bar noted in particular for use as bearings due to their good hardness properties.

Product Details:

The main advantage of using alloy steels is that they offer better properties in comparison to most carbon steel grades while costing lower than stainless steel grades. Both grades 4340 and aisi 4130 round bar belongs to the category of low alloy steels. The additional elements included in their chemistry gives the UNS G86200 Round Bar important properties such as good hardenability, higher tensile strength, superior wear resistance as well as good toughness.

Apart from these characteristics, alloying the aisi 4340 steel rod improves other properties like its fatigue strength, resistance to abrasion and impact resistance. There is an increase noticed in alloy steels ductility as well, making it relatively easier to form AISI 8620 Alloy Steel Round Bar. However, this being said, the hardness properties of carbon steel is very high. Because the content of carbon in Carbon Steel AISI 1045 Round Bar is high, the steel inherently has a better hardness, which makes it tougher. Unfortunately, its hardness also makes carbon steel very brittle, and stress in the form of either temperature change or high pressure can crack carbon steels.

Such applications call for a more ductile component like DIN 1.6523 Rod to be used for the production. Ductile alloys permit some levels of flexibility and in turn alloy minor expansion or contraction during temperature change. Ductility is a property, which keeps the UNS G10450 Cold drawn bar cracking in check, as their expansion or contraction prevents the formation of cracks.

Product Details:

These 20Mncr5 CS Forged Bars are also used in applications where good wear resistance is considered as a primary requirement. Hence, the Carbon Steel 20Mncr5 Bright Bars are a part of mechanical controlling parts. 20mncr5 steel round bar weight could be customized, depending on the requirements of the buyer or the application.

Apart from a higher tensile strength, the 20Mncr5 DIN 34CrNiMo6 Rods exhibit superior toughness and good hardenability characteristics as well. The resulting performance of the 20Mncr5 Carbon Steel Round Bar after heat treatment will yield better results as compared to alloy 20Cr. Even when used in low temperature applications, the 20mncr5 steel forging bar demonstrates good toughness and better machinability.

However, the performance of Carbon Steel 20Mncr5 Hex Bar for welding operations is low; which is why this alloy is not suited to be used for use in applications that require welding. Generally, these CS 20Mncr5 Cold Finished bars are supplied in a carburizing quenching or quenched condition.

 

20MnCr5 Round Bars Material Specifications Chart

• Standard : ASTM A29
• grade: 20MnCr5
• number: 1.7147
• Classification:    Alloy special steel
• Standard: EN 10084: 2008 Case hardening steels. Technical delivery conditions
• Sizes 20MnCr5 Round Bars : diameter 8mm – 3000mm

 

Product Details:

EN8 round bar is pure medium carbon steel with decent ductile strength compared to normal mild steel. EN8 steel is appropriate for all round manufacturing applications, which require advanced strength such as manufacturing tubes, studs, bolts, linking rods, screws, rollers etc.

EN8 bright bar is a medium power cheerful mild steel that is appropriate for general manufacturing purposes that need steel of a higher power than mild steel. Characteristic uses include tubes, studs, screws and keys. Better superiority than EN3 but is less effortlessly machined.

Product Details:

HSS or High speed steels are classified as tool steels, which could be used in the manufacture of tools for cutting. Typically, the High Speed Steel Rod is used in the manufacture of power-saw blades and drill bits. One of the benefits of using this carbon steel grade is that they can withstand elevated temperature settings and not lose their temper or what is referred to as hardness. This high hardness is a property that permits Hss Round Bar to drill or saw across at a faster rate in comparison to high carbon steels.

Other properties that are linked to High Speed Steel Carbon Steel Bright Rods include high hardness and resistance to abrasion. Although the addition of elements tungsten and vanadium in the alloy of CS High Speed Steel Round Rods has been associated with imparting the rods with superior abrasion resistance properties. Some manufacturers may include cobalt in the alloy of these steels. While cobalt also increases the hardness, the primary property enhanced by this particular element is the heat resistance behaviour of Carbon Steel Hex Rods.

As expected of most forged products, the surface of these rods become much smoother in addition to the grain flow getting aligned to the shape of High Speed Carbon Steel Forged Rods. The most popular application that uses High Speed Steel Round Rods is woodturning, since the acceleration of the inclination of work past the threshold is relatively high, especially for handheld tools. Furthermore, the HSS material tends to hold its edge for a far greater period in comparison to high carbon steel tools.

 

High Speed Steel Rod Specification

• Small Dia 20mm to 63 mm
• Medium Dia: 65 mm to 160 mm
•  Large Dia: 165mm to 350 mm

Product Details:

The Ohns Steel Material is required for master tools, gauges as well as dies. To simplify, the Ohns Rod is used in applications which stresses the importance that the size of the component not be changed once it has been hardened after being machined in an annealed condition. Hence, this OHNS High Speed Steel Bar is supplied in an annealed condition. Speaking about the characteristics of the alloy, the OHNS Bright Bar exhibits good durability, while offering excellent wear resistance properties and holds a good cutting edge.

With these properties, this tool grade OHNS Bar 1.2510 is regarded to be an excellent general purpose alloy. Therefore, the DIN 1.2510 Round bar is often used where the expense of a high carbon high chromium tool steel is an alloy grade that would not be justified. Following a proper annealing procedure will result in the OHNS Steel Flat Bar inheriting a maximum hardness value of 212 HBW.

 

Heat Treatment Of OHNS Round Bar

 

Product Details:

A D2 Steel Rod is an air hardened, tooling steel grade. The high carbon, high chromium containing Tool Steel D2 Round Bar exhibits high wear and abrasion resistance properties.  The d2 tool steel tig rod is a heat treatable alloy. AISI O1 (DIN-1.2510) Round Rods has a  hardness value which falls in the range between 55 HRC – 62 HRC.

Product Details:

1008 steel round bar are medium carbon and chromium steel which has excellent tensile strength. This is welded and then used for screw machine parts, shafts, pins, spindles and rods. Also available in various other industries. SAE 1008 round bar has many chemical and mechanical properties such as steel grade, tensile strength and elongation. 

Check SAE 1008 Chemical Composition

1008 Steel Round Bar SAE 1008 chemical composition has elements like manganese, iron, sulphur, carbon, phosphorus and also the percentage of the content is described. SAE 1008 mechanical properties describes the product and is manufactured based on this information.    

 

Chemical Material Composition Of 1008 Steel Round Bar View AISI 1008 Steel Specification

1008 round bar is the carbon steel grade and it contains low carbon steel, 1.2% manganese and 0.4% silicon, aluminum, chromium and copper. This is available in variety of shapes, sizes and thus one can order it as per the requirement. 1008 carbon steel rods are manufactured by using high quality raw material and therefore it has excellent corrosion resistance and the durability power is excellent.

 

Physical Properties Of SAE 1008 Round Bar

Product Details:

M2 Steel Rods are made up of a tungsten molybdenum too steel material. The material is highly wear resistant, has red hardness and well balanced toughness. Micro Metals is a leading manufacturer of the M-2 High Speed Steel Round Bar has carbon, tungsten, vanadium, molybdenum and chromium in the composition. The yield strength of the material is an impressive 3250MPa when tempered at 300F.

The Rockwell C hardness of the material can go up to 65. The bar size can range from 4mm to 100mm. The M2 Stainless Steel Threaded Rod can have diameters ranging from 16mm to 200mm. The thickness of the flat bars range from 2mm to 100mm with the width ranging from 10mm to 100mm. There are different tolerance levels to the Ppq/Pps M2 Steel Guide And Drill Rod ranging from H8 through H13 and K9 through k12 and as per customer requirements.

The rods could be hardened, tempered and annealed for strength. They can come in hot rolled, cold drawn, cold rolled or forged conditions. The DIN-1.3343 Round Rods can be precipitation hardened as well. The applications of the rods can be seen in milling cutter, wist drills, reamers, taps, saw, knives and broachers. Please feel free to contact us for more information on the products as we are a leading AISI M2 Square Rods Suppliers.

Product Details:

The main advantage of using alloy steels is that they offer better properties in comparison to most carbon steel grades while costing lower than stainless steel grades. Both grades 4340 and aisi 4130 round bar belongs to the category of low alloy steels. The additional elements included in their chemistry gives the UNS G86200 Round Bar important properties such as good hardenability, higher tensile strength, superior wear resistance as well as good toughness.

Apart from these characteristics, alloying the aisi 4340 steel rod improves other properties like its fatigue strength, resistance to abrasion and impact resistance. There is an increase noticed in alloy steels ductility as well, making it relatively easier to form AISI 8620 Alloy Steel Round Bar. However, this being said, the hardness properties of carbon steel is very high. Because the content of carbon in Carbon Steel AISI 1045 Round Bar is high, the steel inherently has a better hardness, which makes it tougher. Unfortunately, its hardness also makes carbon steel very brittle, and stress in the form of either temperature change or high pressure can crack carbon steels.

Such applications call for a more ductile component like DIN 1.6523 Rod to be used for the production. Ductile alloys permit some levels of flexibility and in turn alloy minor expansion or contraction during temperature change. Ductility is a property, which keeps the UNS G10450 Cold drawn bar cracking in check, as their expansion or contraction prevents the formation of cracks.

Product Details:

The main advantage of using alloy steels is that they offer better properties in comparison to most carbon steel grades while costing lower than stainless steel grades. Both grades 4340 and aisi 4130 round bar belongs to the category of low alloy steels. The additional elements included in their chemistry gives the UNS G86200 Round Bar important properties such as good hardenability, higher tensile strength, superior wear resistance as well as good toughness.

Apart from these characteristics, alloying the aisi 4340 steel rod improves other properties like its fatigue strength, resistance to abrasion and impact resistance. There is an increase noticed in alloy steels ductility as well, making it relatively easier to form AISI 8620 Alloy Steel Round Bar. However, this being said, the hardness properties of carbon steel is very high. Because the content of carbon in Carbon Steel AISI 1045 Round Bar is high, the steel inherently has a better hardness, which makes it tougher. Unfortunately, its hardness also makes carbon steel very brittle, and stress in the form of either temperature change or high pressure can crack carbon steels.

Such applications call for a more ductile component like DIN 1.6523 Rod to be used for the production. Ductile alloys permit some levels of flexibility and in turn alloy minor expansion or contraction during temperature change. Ductility is a property, which keeps the UNS G10450 Cold drawn bar cracking in check, as their expansion or contraction prevents the formation of cracks.

 

Specification And Material Grade Of AISI/SAE 4130/4140/4340 Carbon Steel Round Bar

 

Product Details:

Typically the C45 CS Forged Bars are supplied in either a black hot rolled condition or they could be supplied occasionally in a normalised condition. The tensile strength of Carbon Steel C45 Round Bars ranges between 570 Mpa – 700 Mpa, while the Brinell hardness value ranges between 170 – 210 in both, normalised and black hot rolled condition. However, these Carbon Steel C45 Bright Bars do not respond satisfactorily to nitriding conditions due to a lack of suitable elements for its alloying.

C45 steel round bar is equivalent to EN8 or 080M40. Application of the C45 welding rod includes its suitable for the manufacture of equipment such as general-purpose axles,  gears, bolts, and shafts, keys and studs. The aforementioned equipment requires good mechanical strength, therefore CS C45 Round Bar demonstrates their suitability here. The strength and wear resistance of C45 steel rod is much higher as compared to a low carbon mild steel alloy grade. As one of the leading C45 round bar manufacturer in India, we offer highly competitive pricing solutions.

Product Details:

SAE 1010 cold rolled steel rod is very much similar to 1010 hot rolled round bar but the only main difference between both of them is that hot rolling mentions to dispensation done with heat whereas cold rolling mentions to procedures done at or near room temperature. It may seem understandable, but some types of steel are better matched for certain submissions.

SAE 1010 Round Bar is low carbon steel and it is used in instrument and die factories, machine repair and comportment adjustments. 1010 Steel round bar is used in low power applications. It has decent machinability and can be hardboiled. 1010 Carbon Steel Rods is a pure carbon steel with an insignificant 0.10% carbon satisfied. It is a comparatively low power steel but it may be satisfied and tempered for increased strength. The short carbon steels, such as 1010, are used for claims such as cold controlled fasteners and bolts.

Product Details:

Steels components such as SAE 1015 Round Bar with only carbon as their major alloying element are referred to as carbon steels. According to the ASTM 1015 Steel Chemical composition, this carbon steel grade contains traces contents of both silicon and manganese.

 

Following Aditional Grades We Manufacture Except 1015 Round Bars:

MS, SAE 1018, IS 2062, A105, SAE 1008, SAE 1010, SAE 1015, C15, C18, C20, 1020, C22, 1022, C25, 1025, C30, 1030, C35, 1035, 35C8, S35C, C40, 1040, C45, 45C8, 1045, CK45, C50, 1050, C55, 55C8, 1055, C60, 1060, C70, 41Cr4, 40Cr4, 40Cr1, En18, En18D, SAE 1541, SAE 1536, 37Mn2, 37C15, En15, SAE 1141, LF2, EN19, SAE 4140, 42CrMo4, EN24, EN31, SAE 52100, 20MnCr5, 8620, EN1A, EN8, EN8D, EN9, ST 52.3, EN42, En353, SS 410, SS 202, SS 304, SS 316 and other grades as per customer requirement.

Product Details:

Plastic Mold Steel are used to prepare plastic molds that may include chemically aggressive or abrasive fillers. They are very effective and safe to use. They are the most popular option for mold materials that do not contain abrasives such as glass fibers or corrosive chemicals.

• AISI P20 Plastic Mould Steel

• AISI P20 Ni Plastic Mould Steel

• P20 Ni Plastic Mould Steel

• DIN 2311 Plastic Mould Steel

• 40CrMnNiMo7 Plastic Mould Steel

• P20 Plastic Mould Steel

• 40CrMnNiMo864 Plastic Mould Steel

Product Details:

We are providing Cold Work Tool Steel assortment to the customers in different shapes, sizes, designs and so on to meet specific requirements in construction, automobile and much more industries.

• D3 Tool Steel

• SKD 11 Steel Round Bars

• SKD10 Cold Die Steel

• CR12V Square Steel Bars

• D2 Die Steel

• HCHCR D2 Cold Work Tool Steel

• D2 Cold Work Tool Steel

• 2379 Die Steel

• D2 Tool Steel

• 1.2367 Steels Round Bars

• X153CrMoV12 Cold Work Tool Steel

• Z160CDV12 Die Steel

Product Details:

The provided Hot Work Tool Steel collection is deployed as a normal steel material for producing passes, retainer plates, clad trim bites and more material of various kinds for the customers.

• L6 Die Block Steel

• 56NiCrMoV7 Die Block Steel

• 1.2343 Hot Work Tool Steel

• H11 Hot Work Tool Steel

• L6 Tool Steel

• DB6 Die Steel

• 2344 Hot Die Steel

• H11 Hot Die Steel

• 2343 Hot Die Steel

• 55NiCrMoV7 Hot Work Tool Steel

• 2714 Hot Die Steel

• SKT4 Hot Work Tool Steel

Product Details:

En Series Round Bar

• En18 Round Bar
•  En8 Round Bar 
•  En31 Round Bar
•  En47 Round Bar 
•  En24 Round Bar 
•  En353 Round Bar
• En19 Round Bar
• En1a Round Bar
• En45 Round Bar
• En9 Round Bar
• En32b Round Bar

Product Details:

Die Steel Blocks are suited for high-pressure applications, extremely corrosive environments, and other specialist applications. Our forged stainless steel blocks are widely utilized in a variety of industries. They are used in mining for oil and gas, generating electricity, and food processing in the aerospace, medical, and chemical industries.

• 2343 Hot Die Steel Block

• 1.2080 Cold Work Steel Block

• 1.2344 Hot Work Steel Block

• 1.2714 Hot Work Steel Block

• 1.2714 Hot Rolled Steel Block

• 1.2714 Die Steel Block

• Die Block Steel Block

• Die Block Steel

• D3 Steel Block

• Die Steel Block