Excel Metal & Engg Industries
Excel Metal & Engg Industries
Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Valves

We Offer BALL VALVES, FLANGE BALL VALVE, GATE VALVES, GLOBE VALVES, CHECK VALVES, PLUG VALVES, BUTTERFLY VALVES, DIAPHRAGM VALVES, CRYOGENIC VALVES, NON RETURN
MOC : - Carbon steel, Stainlesssteel, Alloy steel, Iron, Bronze and Brass, etc.

Investment Casting Valve

Investment Casting Valve
  • Investment Casting Valve
Get Best Quote
Approx. Price: Rs 99 / Piece(s)

1. Investment casting valve, single piece design full bore, blow out proof stem with ss 304/316 working parts, screwed end

 

2. Investment casting valve, three piece design full bore, blow out proof stem with ss 304/316 working parts, flanged end asa 150#

3. Investment casting valve, three piece design full bore, blow out proof stem with ss 304/316 working parts, screwed ends

All kind ic valves

Request
Callback
Yes! I am interested

Check Valves

Check Valves
  • Check Valves
Get Best Quote
Approx. Price: Rs 299 / P.NOS
Offering Check Valve:

Check valves are heavy duty, bolted cover, renewable seat ring, and body mounted disc swing type. Valves are straight through flow which works automatically. They are opened by the force of velocity pressure and closed by the force of gravity and back pressure. The valves are single direction flow and restrains flow in opposite direction. Distortion, wear and noisy operation of the valve can be avoided by selecting the size of the valve on the basis of flow conditions.

Swing Check valves are best suited for moderate velocity operations. Swing check valves are normally designed for horizontal installations. It can be installed in vertical direction with flow in upward under the disc. There is no tendency for seat to gall because the disc meets flat surface without rubbing upon contact.

The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. Flow directions are marked as cast on the body for ease of installation.

Swing Check valves are adequate for all service media. Valves can also be supplied with counter weights and dash pot arrangement depending upon the condition and request.



Pressure – Temperature ChartASME B 16.34
MATERIALShellWCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Trim13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel
Request
Callback
Yes! I am interested

Check Valves

Check Valves
  • Check Valves
Get Best Quote
Approx. Price: Rs 199 / P.NOS

We are engaged in manufacturers and exporters of a wide range of Check Valves . Our products are manufactured as per the national as well as international quality standards. Our valves are largely admired for Working Pressure : Upto 6, 000 - 10,000 psi. Size: Various in Screwed Ends, Socket Weld Ends, Tube OD Ends. Further, these products have numerous usages in various industries. Besides this, we also provide customized service in varied specifications and in accordance with the client demands.

Specifications :-
·  designed for UNI-DIRECTIONAL flow of fluids and gases Check valve size  with end connection
·    NPT, BSPT AND ODT.
·   Material Construction: S.S.304.S.S.316,carbon steel n ( CS ) and Brass
· Testing: 100% tested for crack and reseal performance

Features:
·         Optimum construction
·         Dimensional accuracy
·         Protection against corrosion
·         High efficiency 

 

 

Request
Callback
Yes! I am interested

Double Block & Bleed Gauge Valves

Double Block & Bleed Gauge Valves
  • Double Block & Bleed Gauge Valves
  • Double Block & Bleed Gauge Valves
  • Double Block & Bleed Gauge Valves
  • Double Block & Bleed Gauge Valves
  • Double Block & Bleed Gauge Valves
Get Best Quote
Approx. Price: Rs 199 / Piece

Product Details:

BrandEMEI
Size1/2

Design for use with gauges switches or Pressure Transmitter . These Gauge Valve incorporates Two-Valve with Single outlet that combines Isolation, Calibration & Venting.

Materials:

Stainless Steel, CS A105, Brass, Monel, Hastelloy, Titanium etc.

End Connections:1/4" To 3/4" Male / Female Threaded Test Pressure:25°C Room Temperature Hydrostatic:

Body - 620 Bar
Seat - 413 Bar

Pneumatic:Seat - 60 Bar Finish:CS Zinc Plated, SS Natural

Request
Callback


Additional Information:

  • Item Code: EMEI-DBBGV
  • Port of Dispatch: Mumbai
  • Production Capacity: 1000 - 10000 Pieces
  • Delivery Time: As per order Quantity
Yes! I am interested

NRV Valves

NRV Valves
  • NRV Valves
Get Best Quote
Approx. Price: Rs 99 / Piece(s)

We offer NRV Valves to our clients in different varieties, which prove useful in Irrigation Purposes. In the particular discharge line, the NRV valves can be set up in a simple manner wherein the delivery pressure is very high. The range of NRV valves can also be installed either vertically or horizontally. These are offered as per international quality standards and at market leading prices.

 

Features include:


  • Sturdy design

  • Durable in nature 

  • Low maintenance

  • Easy to install

Request
Callback
Yes! I am interested

Butterfly Valves

Butterfly Valves
  • Butterfly Valves
Get Best Quote
Approx. Price: Rs 299 / Piece(s)

Butterfly Valves.

Our offered butterfly valves offer excellent performance within the range of their pressure rating. These butterfly valves are manufactured by supreme quality material and contemporary techniques in compliance with set norms. Offered butterfly valves are applauded in the industry for their performance.

Features:


  • Dimensional accuracy
  • High pressure bearing capacity
  • Corrosion resistance


Other Details:


  • Seat liner extending on to the contact faces ensures perfect sealing and eliminates the use of flanges gaskets.
  • Unique triple sealing system for shaft sealing and prevents external substances from entering the stem bore.
  • The thin profile, spherically machined hand polished disc provides a very high CV and greater pressure recovery plus superior abrasion and erosion resistance in slurry or dry media applications.
  • A fully universal body design ensure fitments of the valve between companion flanges of all standards (viz : ANSI, BS, DIN, JIS, IS etc.)


Specifications:

  • General design & manufacturing : API 609 category A / BS 5155 / IS : 13095 / MSS SP - 67
  • Valve face to face dimensions : Short water or Water lugged as per ISO 5752 Tab 5 & API 609 Category "A"
  • Top flange drilling : ISO 5211 part II
  • Valve inspection and Testing : API 598
  • Flange standard conformity : ANSI 150, DIN PN 6/10/16, JIS 5K/10K/16K, BS 10 Tab D & E, IS 6392 PN 0.6/1.0/1.6
Request
Callback
Yes! I am interested

Double Block Bleed Valves

Double Block Bleed Valves
  • Double Block Bleed Valves
  • Double Block Bleed Valves
  • Double Block Bleed Valves
  • Double Block Bleed Valves
Get Best Quote
Approx. Price: Rs 179 / Piece
Forged modular Double Block & Bleed Valves are weight, space & cost saving over traditional hook –ups, combining piping & instrument valves in one compact design. Paramount for pressure instruments take-off points, sampling systems, drains for tanks & pipes where space is restricted, hydraulic power unit systems.
Available in Material:

Stainless Steel, CS A105, Brass, Monel, Hastelloy, Titanium, etc.

All Valves are proof Shell tested at 1.5 times full rated pressure & pneumatic test of the Seats at 80psi thereby ensuring suitability for use across a wide operating range. And a 1.1 times full rated Hydrostatic Seat Test.

Request
Callback


Additional Information:

  • Item Code: EMEI-DBBVS
  • Port of Dispatch: Mumbai
  • Production Capacity: 1000 - 10000 Pieces
  • Delivery Time: As per order Quantity
Yes! I am interested

Globe Valves

Globe Valves
  • Globe Valves
Get Best Quote
Approx. Price: Rs 999 / Piece
Globe Valves. Used for throttling systems, the offered globe valves are designed using superb quality basic material and advanced tools in accordance with prevailing market standard. Moreover, these globe valves are provided in safe temper proof packaging options in order to avoid any physical damage while transit.

Feature:

• Smooth finish
• Unmatched quality
• Simple mounting

Other Details:
• Swastik Industries Cast Steel Globe Valves have been designed to meet the requirements BS 1873 /ASME B 16.34
• Face to Face and End to End dimensions conform to ASME B 16.10 / BS 2080 / DIN
• End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN
• Butt weld end dimensions conform to ASME B 16.25
• All the valves provided with backseat arrangement
• The gland is of self aligning two piece type
• Deep stuffing box
• Angle and Y type design available
• For low temperature and cryogenic services (cold box and non-cold box applications) extended bonnet as per BS 6364 available
• Locking arrangement
• Gear, Electrical, Hydraulic or Pneumatic actuator available
• Regulating, guided and soft seated plugs available
• Bellow Seal for critical service and hazardous media Specifications: Globe Valve 150 Class Size DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 L, L1-RW,BW 203 216 241 292 356 406 495 622 699 787 914 977 977 1295 H (approx) 330 390 410 475 540 585 725 825 940 1200 1270 1300 1350 1450 ØW 200 250 250 300 350 350 450 500 600 600 650 650 700 750 Wt (approx) kg 23 29 40 59 95 115 178 268 385 540 760 1050 1225 1650 Globe Valve 300 Class Size DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 L, L1-RW,BW 267 292 318 355 400 444 558 622 711 838 863 977 1016 1346 H (approx) 350 425 485 520 565 655 825 920 1155 1250 1295 1340 1385 1475 ØW 200 250 300 300 350 350 500 600 700 700 450* 500* 550* 550* Wt (approx) kg 30 45 60 83 135 162 265 375 525 765 1100 1470 1680 2475
Request
Callback
Yes! I am interested

Single Block & Bleed Gauge Valves

Single Block & Bleed Gauge Valves
  • Single Block & Bleed Gauge Valves
  • Single Block & Bleed Gauge Valves
  • Single Block & Bleed Gauge Valves
  • Single Block & Bleed Gauge Valves
Get Best Quote
Approx. Price: Rs 129 / Piece

Product Details:

BrandEMEI
Size1/2" Or As Per Requirement

Valve with down stream vent for usage with Static Pressure Gauge & instrument installation for isolation & venting.
Materials:

Stainless Steel, CS A105, Brass, Monel, Hastelloy, Titanium , etc.

End Connections:

1/4" To 3/4" Male / Female Threaded

Test Pressure:25°C Room Temperature
Hydrostatic:

Body - 620 Bar
Seat - 413 Bar

Pneumatic:Seat - 60 Bar
Finish:CS Zinc Plated, SS – Natural
Request
Callback


Additional Information:

  • Item Code: EMEI-SBBV
  • Port of Dispatch: Mumbai
  • Production Capacity: 10 - 10000 pieces
  • Delivery Time: As per order Quantity
Yes! I am interested

Gate Valves

Gate Valves
  • Gate Valves
Get Best Quote
Approx. Price: Rs 199 / Piece(s)
Gate Valves.
These gate valves are used where it is important that pressure drop through the valve is minimal. Offered gate valves are manufactured under the visionary guidance of professionals using excellent grade material. Additionally, offered gate valves are available from us at nominal rates.

Features:

  • Dimensional accuracy
  • Durable finish standard
  • Rust proof

Other Details:

  •  Steel Gate Valves have been designed to meet the requirements of API 600 / BS 1414 / API 603 / API 6D /ASME B 16.34
  • Face to Face and End to End dimensions conform to ASME B 16.10 /BS 2080 / DIN
  • End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN
  • Butt weld end dimensions conform to ASME B 16.25
  • The stem nut design allows for the removal of the hand-wheel while keeping the Stem and Gate in a fixed position.
  • Anti-frictional Ball bearings are provided in higher sizes and classes.
  • The strength of Stem to Gate connection is stronger than the strength of the Stem at the root of the operating thread
  • Outside screw and yoke construction
  • All the valves provided with backseat arrangement
  • Bi-directional shut-off
  • The gland is of self aligning two piece type Deep stuffing box
  • Body ports are streamlined, permitting unobstructed flow, reduces turbulence, results in lower pressure drop & lower erosion
  • The Seat-rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. In case of SS valves the Seat-rings are integral to Body
  • The Body to Bonnet joint is flat in ASME 150 valves, a male and female joint is used in 300 & 600 and ring joint is used in higher classes
  • Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312
  • Solid, flexible, split wedge, double disc and parallel Slide Gate configurations available
  • For low temperature and cryogenic services (cold box and non-cold box applications) extended bonnet as per BS 6364 available
  • Locking arrangement
  • Gear, Electrical, Hydraulic or Pneumatic actuator available

Specifications:

Part NameMaterial Option
BodyASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB
BonnetASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB
Wedge@ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB
StemASTM A 276 410 / A 276 304 / A 276 304L / A 276 316L
Seat Rings@ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB
Back Seat BushingASTM A 276 410 / A 276 304 / A 276 304L / A 276 316L
GlandASTM A 276 410 / A 276 304 / A 276 304L / A 276 316L
Request
Callback
Yes! I am interested

Plug Valve

Plug Valve
  • Plug Valve
Get Best Quote
Approx. Price: Rs 99 / Piece(s)

We are engaged in offering a wide range of Plug Valve to our valuable patrons. These products are fabricated by employing optimum-grade raw material and latest scientific machinery to ensure optimum quality final product. The offered valves also come with heavy-duty fully rubber encapsulated plug, welded nickel seat and superior shaft seals that helps in preventing issues related to wear and shaft seizing.

 

Salient Features:

 

  • Long lasting performance
  • Timeliness
  • High performance
  • Quality packing that is replaceable
  • Precision finished and lubricated radial upper and lower bearings for extended service life
  • Coming with packing overload protection

 

Specifications:

 

  • Material: SS, CS, Cast Iron, Forged Steel, Ductile
  • Pressure: High Pressure
  • Temperature of Media: High Temperature/other
  • Power: Hydraulic,Pneumatic,Manual,Solenoid
  • Media: Water, Oil,Gas, steam, oil products


Request
Callback
Yes! I am interested

Brass Valve

Brass Valve
  • Brass Valve
Get Best Quote
Approx. Price: Rs 99 / Piece

Product Details:

Brand Excel Metal & Engg Industries
Sizevarious option available

Brass valves are tested by our experts in defined parameters. In addition, these products pass through the hands of skilled professionals, ensuring high durability, efficient and quality-assured products. These products are available in specifications as desired by our esteemed clients in affordable prices.

Features:

  • Fine Finishing
  • Superb Texture
  • Elegant designing
  • Quality-assured
  • Non-corrosive
  • Highly functional
  • Long service life
  • Sturdy construction
Request
Callback
Yes! I am interested

Valves

Valves
  • Valves
Get Best Quote
Approx. Price: Rs 99 / Piece(s)
Supplier & Exporter of valves & Industrial Valve. Our product range also comprises of Nitronic Products, Inconel Profiles 600 and Inconel Profiles 601.

Industrial Valve

Request
Callback
Yes! I am interested

Gate Valve

Gate Valve
  • Gate Valve
Get Best Quote
Approx. Price: Rs 999 / Piece(s)

The gate valve is considered to be the most popular style of valve in the world of flow control. It is a type of valve having a gate that moves perpendicular to flow of the service and hence the name. A gate valve is usually used as a shut-off valve. In the up position, the valve is open. In the down position, the valve is closed. It is also known by other names like knife valve or slide valve or stop or block valve as its primary purpose is to stop the flow. This valve has become an important piece of fluid control equipment for more than 150 years. In fact, this was the first valve patent issued in the United States. The gate valve has become a one-stop solution for fluid control call with relatively little basic design change.

Materials used:
Brass
Copper
Cast Iron
Bronze
Ductile iron
Stainless steel
Metal alloys
Plastic
Ceramic etc.
Request
Callback
Yes! I am interested

Cocks

Cocks
  • Cocks
Get Best Quote
Approx. Price: Rs 39 / Piece(s)
Offering you a complete choice of products which include SS Cocks such as S.S. Syphone Cock, S.S. Gas Cock, S.S. Drain Cock, S.S. Pet Cock, S.S. Gauge Glass Cock, S.S. Bend Nose Cock and many more items. 
SS Cocks
  • S.S. Syphone Cock
  • S.S. Gas Cock
  • S.S. Drain Cock
  • S.S. Pet Cock
  • S.S. Gauge Glass Cock
  • S.S. Bend Nose Cock
  • S.S. Air Cock
  • Snuber
  • Three Way Syphone Cock
Request
Callback
Yes! I am interested

Valve Keys

Valve Keys
  • Valve Keys
Get Best Quote
Approx. Price: Rs 250 / Piece(s)

Valve Keys

* More conveniently
* Effortlessly.
* Simple to use
* Provides better leverage 
* Proper grip
* Manufactured in various sizes 

S.No.

EMEI Model

Valve Size

Valvo Length

Weight

 

 

 

 

 

1

EMEI/01

½" to 1"

225 mm long

260g

 

 

 

 

 

2

EMEI /02

1" to 2"

250 mm long

540g

 

 

 

 

 

3

EMEI /03

3" to 4"

300 mm long

630g

 

 

 

 

 

4

EMEI /04

6" to 8"

350 mm long

1.1 Kg

 

 

 

 

 

5

EMEI /05

10" to 14"

400 mm long

1.3 Kg

 

 

 

 

 

6

EMEI /06

16" to 20"

450 mm long

2.2 Kg

 

 

 

 

 

7

EMEI /07

22" to 24"

500 mm long

2.4 Kg

 

Request
Callback
Yes! I am interested

Solenoid Valves

Solenoid Valves
  • Solenoid Valves
Get Best Quote
Approx. Price: Rs 350 / Piece


We have established ourselves as a renowned manufacturer, supplier and trader of a vast array of Hydraulic Solenoid Valves. Manufactured using finest quality material, these products operate demanding fluid control applications. Also, these valves have multipurpose applications for air, gases, oils and liquids. Customers can avail these valves in different forms like 2-way, 3-way, 4-way, normally closed, normally open, 4/2 way, 5/2 way, direct and pilot operated.

SOLENOID OPERATED DIRECTION CONTROL VALVES
The salient features of these Valves are as follows :
*Very robust construction
*Available across 12V, 24V, 110V and 230V
*Complete flexibility of interchange- ability of coils. No need to change core
*Designed to meet appropriate CETOP, DIN and ISO Standards
*With strong magnet and spring force, the valves are tough against contamination and thus *ensure a stable operation
*Rated for Operating Pressure of 315 Bar
*High switching frequenc

Request
Callback
Yes! I am interested

Flanged Valve

Flanged Valve
  • Flanged Valve
Get Best Quote
Approx. Price: Rs 229 / Piece
We are one of most trusted and leading exporters and suppliers of these Flanges Valves. Thease flanged valves are manufactured forging technique and by procuring superior quality raw materials. Our Flanges Valves are manufactured by the renowned manufacturers in the market who has the team of best and professional workers. We offer these valves in Stainless Steel, Carbon Steel, Cast Iron, Copper Alloy, Ductile Iron, Mild Steel, Inconel, Monel, Nickel Alloy etc..

Feel free to contact us for any future query
Request
Callback
Yes! I am interested

Balancing Valves

Balancing Valves
  • Balancing Valves
Get Best Quote
Approx. Price: Rs 199 / Kilogram

We are one among the leading manufacturers and suppliers of Balancing Valves that are manufactured using the optimum metals and alloys sourced from the reliable vendors. Finding a vast application in chemical and petrochemical industries, these possess high demand in the market. Furthermore, these offered balancing valves are known for their anti-corrosive properties.

Features:


  • Dimensionally accurate
  • Abrasion resistance
  • High durability
Request
Callback
Yes! I am interested

Gauge Valve

Gauge Valve
  • Gauge Valve
Get Best Quote
Approx. Price: Rs 59 / Piece

We offer Gauge Valve with complete assembly in SS 304, SS 316 and other grade as per request.


 Gauge Valve are with Vent plug. we offer with vent plug.

Size - 1/4' to 2' npt /bsp ( male or female)

Pressure - 3000 psi or 6000 psi ( 10000 psi on request). We make high quality and gauge qualified gauge valves.
Request
Callback
Yes! I am interested

Gun Metal Valve

Gun Metal Valve
  • Gun Metal Valve
Get Best Quote
Approx. Price: Rs 149 / Piece

The company is engaged in the manufacturing and supplying of superlative quality Gunmetal Valves and Bronze castings. These products can be procured as per customer requirements in BS, IS, JIS, DIN, ASTM ,SAE and other international standards. Backed by an advanced in-house Wet lab and online Spectro Meter analysis facility, we are able to offer superior range of products to the customers. These are well known in the market for the following reasons:

 

  • High Ductility
  • Resistance to Corrosion
  • Good Flexibility
  • Heat Resistance
  • Outstanding Material Strength
  • Efficient performance
  • Shock Resistance
Request
Callback


Additional Information:

  • Item Code: EMEI-GM-VALVE
  • Port of Dispatch: EX-WORK , MUMBAI
  • Production Capacity: 1000 - 10000 Pieces
  • Delivery Time: As per order Quantity
Yes! I am interested

Valves

Valves
  • Valves
Get Best Quote
Approx. Price: Rs 99 / Piece
We manufacture a wide range of Valves which are known for its isolation characteristics and excellent sealing. These valves are used for controlling fluids and help in preventing the migration of the fluids out of the valves or other valve mechanisms. Our range of diaphragm valves makes use of a valve shoulder and a resilient diaphragm which engages a valve seat and helps to prevent the fluid to flow from the vale seat.

 

Request
Callback


Additional Information:

  • Item Code: EMEI-VALVE
  • Port of Dispatch: EX-WORK , MUMBAI
  • Production Capacity: 1000 - 10000 Pieces
  • Delivery Time: As per order Quantity
Yes! I am interested

Flow Control Valves

Flow Control Valves
  • Flow Control Valves
Get Best Quote
Approx. Price: Rs 150 / Piece

Product Details:

MaterialStainless Steel
BrandExcel Metal & Engg Industries
Valve Sizevarious option available
MediaAir, Water, Fuel

Excel Metal & Engg Industries Leveraging on our years of experience, we hold expertise offering an alluring assortment of excellent quality Flow Controlsto prestigious clients. We offer these products in various specifications to our respected customers.

Following are the some other features of these products:

  • Compact design

  • Easy to install

  • Hassle-free performance

  • Low maintenance

Request
Callback


Additional Information:

  • Port of Dispatch: EX-WORK , MUMBAI
  • Production Capacity: 1000 - 10000 Pieces
  • Delivery Time: As per order Quantity
Yes! I am interested
X
Looking for “Valves”?


Reach Us
Shyam Choudhary (Proprietor)
No. 177/181, JT Building, Dr. M. G. Mahimtura Marg 3rd Kumbharwada Lane
Mumbai- 400004, Maharashtra, India


Call Us

Send E-mail

Send SMS