Gasket Industriesis a leading Manufacturer and Exporter of industrial Gasket & Packging for every Industry.
Our wide range of gasket includes:
|Carbon steel, soft iron||Monel® 400||Hastelloy B2 & C276|
|304L||310||INCONEL® 600, 625&x-750||Zirconium|
|316||321||INCOLOY® 800 & 825||Duplex|
|316L||3CR12||TITANIUM||PTFE(Inner Rings Only)|
|API||605 (ASME B16.47 series B)|
|MSS SP||44 (ASME B16.47 SER.|
Ring Type Joint Gasket
Ring Type Joints are primarily used by the oil, gas, petrochemical and offshore industries, they are also commonly used on valve, pipe work assemblies and with some integrity vessel joints. Ring type are use to seal flanged connections subject to high pressures and temperatures. These precision made solid metal gaskets form a metal to metal seal with the flanges. The gasket cross-sections are designed to concentrate the bolt load over a small area to produce a high seating stress. The gasket metal should always be softer than the mating flanges. The high seating stress causes 'plastic-flow' of the gasket into the flange faces to create seal. The 'RX' and 'BX' gaskets are designed to be pressure activated by the sealed media which improves the efficency of the seal as the internal pressure of the system increases.
We manufacture Rubber Gaskets and 'O' Rings from high-grade raw materials in order to give a durable performance. Our Moulded Gaskets and Extruded Rubber Gaskets in different profiles are widely used in various industries and applications. The Rubber Gaskets are available in varied hardness and other physical parameters as per the client's requirements.These may sometimes be reinforced with Fabric insertion of Cotton/ Nylon/Metallic wire Mesh/ Solid Steel Insert.
· 'O' Rings- Washers- Gaskets for Manhole/Flanges in Full/ Falt Face or Raised Face
· Molded Components -Extruded Profiles/ sections -Self Adheshive Strip Panel Gasket
· Expansion Bellows- Hose Pipes
Available In :
· Viton® / FluroPolymer- Silicon® / HT Silicon- Food Grade(White/Translucent)
· Buna-N / Nitrile® / NBR- Neoprene® - EPDM – Butyl – Hypalon-Natural - Food Grade
· Natural / Neoprene® /EPDM / Silicon®
|Spiral wound gasket is manufactured by spirally winding a pre-formed metal strip and filler on the outer peripery of metal winding mandrels. The winding mandrel outside diameter forms the innner diameter of the gasket and the lamination are continually wound until the outer diameter is attaineds.|
The inner and outer diameters is reinforced with several plies of metal with no fillers being introduced. This gives greater stability and provides better compression and sealing characteristics. Then by varying the ratio of the filler to the metal plies for a given gasket width density, and hence the compressibilty, can be controlled.
1. Spiral wound gasket without inner and outer ring suitable for tongue and groove flange and narrow width flange.
2. Spiral wound gasket with outer ring which accurately centers gasket on flange and acts as compression stop.
3. Spiral wound gasket with inner and outer ring, innner ring gives an additional compression limiting stop and provides heat and corrosion barrier protecting gasket winding and flange erosion.
4. Spiral wound gasket with metal jacketed partition bar welded to spiral wound gasket for use on heat exchanger.
Metal Winding Strip:Stainless Steel Type 304, 304L, 316, 316L, 321, 347, 410, Inconel 600, Monel, Titanium, Incoloy 800.
Filler Material: Compressed Asbestos, Flexible Graphite, PTFE, Ceramic.
Guide Ring Material: Carbon Steel, S.S. Type 304, 304L, 316, 316L, 321, 347, 410, Inconel 600, Monel, Titanium, Incoloy 800.
We supply a wide range of Spiral Gasket, Heat Exchanger Gasket Copper, Brass & SS Solid gaskets. These are suitable for application where improved performance at low seating stresses is required. Acknowledged for their excellent anti-blow-out features that is linked with the reliability of a solid metal-to-metal seal. This is combined with a soft sealing face to ensure a tighter joint. Further, the solid metal gaskets are mainly suitable for high temperature, pressures and fluctuating condition applications. These products are excellent replacement for application associated with:
Oval Ring Joint Gasket - Type R is manufactured using superior quality materials and according to the international quality standards. These are available in various specifications and can be customized as per the demands of the clients. Our range is used in various sectors for different kinds of applications. Clients can avail these at affordable prices in the market.
Width of Ring --- +/- 0.20;
Height of Ring --- +/- 0.50;
Pitch Diameter --- +/-0.18;
(Octagonal) Angle of 23o --- +/- 0.5o
We manufacture and export Octagonal Ring Gasket that are made using standard quality materials and according to the specifications of the clients. These are tested for their quality and utility to ensure defect free products to our clients. We offer these to our clients at reasonable prices in the market. Our range is highly demanded for their quality, durability and excellent service.
Width of Ring --- +/- 0.2;
Height of Ring --- +/- 0.4;
Pitch Diameter --- +/- 0.18;
(Octagonal) Angle of 23o --- +/- 0.5o
Metal Jacketed & Metal Corrugated Gaskets. For many years now, the metal jacketed gasket design has served industries sealing needs, providing a cost effective, quality seal with the introduction of improved gasket manufacturing processes and materials, this trend is deemed to continue for many more to come. Metal jacketed gaskets comprise of a soft / non asbestos material either partically or totally enveloped in a metallic sheath. This gasket arrangement allows for a high strength, quality gasket seal suitable for use on standard flage assemblies, valves, pumps, heat exchangers and other similar services.
· Single Jacketed Gaskets
· Overlapped Single Jacket
· Double Jacketed Gaskets
· Double Shell Gaskets
· Corrugated Double-Jacketed Gaskets
· French-Type Gasket
· Two-Piece French-Type Gasket
· Corrugated Metal Gaskets
· Single-Jacketed Gasket
· Double Jacketed Corrugated Gasket
BX Type Ring Joint Gasket is used in various sectors for different kinds of applications. These are manufactured using premium quality materials and according to the international quality standards. These are available in different sizes, dimensions and can be made as per the requirements of the clients. These are accessed by our clients at competitive prices in the industry.
Width of Ring --- +0.20 ~ -0.00
Hole Size --- +/- 0.5
Height of Ring --- +0.20 ~ -0.00
OD of Ring --- +0.00 ~ -0.15
Angle of 23o --- +/- 0 deg 15 min
Note: Radius of the ring shall be 8% to 12% of the ring height
Capitalizing on our in depth industry experience we are engaged in offering superior quality RX Type Ring Joint Gasket to our clients. These are used in various industrial applications for their excellent service and optimum performance. These are availed at a cost effective price in the industry by our clients. We manufacture these using best quality materials that are tested for their quality and utility.
Width of Ring --- +0.20 ~ -0.00;
Height of Ring --- +0.20 ~ -0.00;
A plus tolerance of 0.2mm for width and height is permitted, provided the variation in width or height
does not exceed 0.10mm throughout its entire circumference.
OD of Ring --- +/-0.51 ~ -0.00;
Angle of 23o --- +/-0.5o
Note: only ring RX82 through RX91 have a pressure passage hole through the cross section. Center line of hole is located on the mid-point of the width flat.
Hole diameter shall be as follows:
RX-82 through RX-85 --- 1.52;
RX-86 and RX-87 --- 2.29;
RX-88 through RX-91 --- 3.05/
We are One Of the Leading Distributors, Supplier & Exporter of bonded seals (commonly known as Dowty Seals) in Mumbai,INdia. Bonded Seals is Often used as Bolt Seals in hydraulic equipment. Bonded Seals are Used in Varied Applications throughout industry. All size ranges and material combinations are available. We can provide you in customised shapes for specific applications in any of the combinations of rubber to metal or plastic bonding.These bonded seals are metal washers with a vulcanized rubber inserted for use in high-pressure applications. Available in Various Sizes, Grades & specifications and can also be customized as per the requirements of our clients.
Features of our Bonded Seals :
Advantages of Bonded / Dowty Seals: