Excel Metal & Engg Industries
Girgaon, Mumbai, Maharashtra
GST No. 27AABPC0886H1ZW
TrustSEAL Verified
Call 0804896737188% Response Rate
SEND EMAIL
| InconelFlange | InconelPipe Fittings | Inconelbar ( Round / Flat / Hex) |
| InconelPlate / Sheet | Inconel Pipe /Tube | Inconel Coil/ Foil |
| Inconel Wire | InconelFastners | InconelCustomized Products |
Product Details:
| Usage | Manufacturing |
| Single Piece Length | >36 meter, 6 meter, 18 meter, 3 meter, 36 meter |
| Bar Type | Nickel Bar |
| Finishing | Matte, Polished, Glossy |
| Type | Sheet, Plate, Bar |
| Condition | New |
Specification
Standard ASTM / ASME SB 166, ASTM / ASME B 446 , ASTM / ASME B 637, ASTM B 511, ASTM B 408.
Grade Inconel 600 (UNS No. N06600),Inconel 601(UNS No N06601),Inconel 625 (UNS No N06625), Inconel 718 (UNS No N07718 )Range5 mm to 500 mm Dia
Length100 mm to 6000 mm
Finish Bright, Polish & Black
Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.
Chemical Composition
GradeNiFeCMnSiCuCrSMoCoAlTiNb60072.0 min6.0 - 10.00.15 max1.0 max0.5 max0.5 max14.0 - 17.00.015 max-----60158.0 – 63.0Balance0.10 max1.0 max0.50 max1.0 max21.0 – 25.00.015 max8.0-10.0-1.0 – 1.7--62558.0 max5.0 max.10 max.50 max.50 max-20.0 - 23.0.015 max8.0 - 10.01.0 max.40 max.40 max3.15 - 4.1571850 - 55-0.08 max0.35 max0.35 max0.3 max17 - 21.015 max2.8 - 3.31.0 max---
Mechanical Properties of Inconel 600/601
Grade Tensile (psi).2% Yield (psi)Elongation (%)60095,00045,0004060180,00030,00035
Mechanical Properties of Inconel 625
Temp° F Tensile (psi).2% Yield (psi)Elongation in 2 “ (%)70144,00084,00044400134,00066,00045600132,00063,00042.5800131,50061,000451000130,00060,500481200119,00060,00034140078,00058,50059160040,00039,000117
Mechanical Properties of Inconel 625/718
Grade Tensile Strength Yield Strength (0.2%Offset)Elongation625Psi – 135,000 , MPa – 930Psi – 75,000 , MPa – 51742.5 q8Psi – 135,000 , MPa – 930Psi – 70,000 , MPa – 48245 %
List of countries/Where we export and supply from last 25 years –
India, Canada, Angola, Argentina, Austria, Azerbaijan, Peru, Chile, Yemen,
Saudi Arabia, Bangladesh, United States, United Arab Emirates, Hong Kong, Croatia,
Czech Republic, Estonia, South Africa, Nigeria, Mexico, Turkey, Spain, France, United Kingdom,
Indonesia, Singapore, Taiwan, Gabon, China, Finland, Greece, Italy, Japan, Hungary, Israel, Iran,
Kuwait, Mexico, Malaysia, Nigeria, Serbia, Algeria, Belarus, Belgium, Afghanistan, Bahrain,
Portugal, Switzerland, Libya, Romania, Thailand, Bhutan, Netherlands, Brazil, Colombia, Ghana,
Iran, Bolivia, Bulgaria, Slovakia, Vietnam, Qatar, New Zealand, Sweden, Trinidad & Tobago,
Tunisia, Ukraine, Kenya, Lebanon, Morocco, Iraq, Jordan, Kazakhstan, South Korea, Sri Lanka,
Lithuania, Mongolia, Russia,
List of city we supply from last 25 years –
Mumbai, Thane, Navi Mumbai, Pune,New Delhi, Bengaluru, Chennai, Surat,
New York, Caracas, Howrah, Sydney, Ahvaz, Algiers, Pimpri-Chinchwad,
Vadodara, Kolkata, Gurgaon, Ahmedabad, Chiyoda, Ankara, Ho Chi Minh City, Bhopal,
Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Tehran, Calgary, Noida, Riyadh, Vung Tau,
Al Khobar, Atyrau, Lagos, Ulsan, Faridabad, Houston, Hanoic, Toronto, Hong Kong,
Rajkot, Brisbane, Los Angeles, London, Muscat, Edmonton, Busan, Mexico City, Doha,
Jeddah, Manama, Montreal, Thiruvananthapuram, Milan, Moscow, Dallas, Coimbatore,
Jakarta, Istanbul, Bangkok, Kuwait City, Sharjah, Petaling Jaya, Ernakulam, Visakhapatnam,
Ludhiana, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur,
Rio de Janeiro, Dammam, Secunderabad, Gimhae-si, Haryana, Colombo, Bogota,
Melbourne, Madrid, La Victoria, Granada, Courbevoie, Courbevoie, Port-of-Spain,
We are also looking forward for a distributer from any of countries for our products , if any client is interested we can visit and complete the deal.
Additional Information:
Product Details:
| Size/Diameter | 20mm |
| Material | Mild Steel |
| Length | 6 meter |
| Usage/Application | Industrial |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
The Inconel 600 Round Bar has 72% nickel, 14% chromium, iron, carbon, manganese, sulfur, silicon and copper in the composition. The material has high melting point of 1413 degrees Celsius.
The ASTM B166 UNS N06600 Bar has 310MPa minimum yield strength and 655MPa minimum tensile strength. The material has good oxidation resistance even in elevated temperatures. The corrosion resistance against organic and inorganic acids of the Inconel 600 Rod is very high so it is used in chemical processing industries as well. The material has resistance to chloride ion stress corrosion cracking as well.
The specification and the standards cover the bars of 3mm to 800mm in diameter with lengths varying up to 6000mm. The Alloy 600 Hex Bar can be hot rolled, cold drawn, cold drawn or forged. The applications include nuclear power plants, nuclear reactors, heat treat furnace applications and gas turbine components as well. The Inconel 600 Flat Bar and other bars can also be used in electronic parts and jet engine applications. Please feel free to contact us for more information on the 600 Inconel Square Bar and other bar types with a complete price list.
Inconel Round Bar Standard Specifications
| International Specifications | BS 3072-3076 (NA14) DIN 17742, DIN 17750, DIN 17754 WERKSTOFF Nr 2.4816 TÜV 305 AFNOR-NC 15 Fe |
|---|---|
| Grade | Inconel 600 – UNS N06600, Nickel Alloy 600 |
| Specification | ASTM B166 UNS N06600, AMS 5665 |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Section | 3.0 to 12.0mm thickness |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Billet Size | 1/2″ to 495mm Diameter |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Condition | Hardened & tempered, annealed |
| Technique | 600 Inconel Cold Drawn, Hot Rolled, Forged Round Bar, Rod, Cold Rolled |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Cold Drawn, Bright, Sand Blasting Finished, Hot Rolled Pickled, Hairline, Polished |
| Processing | Bar cutting to 650mm |
| Form | Precision Ground Bar, Flat Bar, Square, Round, Half Round Bar, Rod, Rectangle, Hex (A/F), T-Bar, Channel Bar,Blocks, Round Rod, Threaded, Profiles, Billet, Ingot, I/H Bar, Forging, Rings, Hollow, Triangle etc. |
| Our 600 Inconel Round bar conforms to NACE MR0175/ISO 15156 | |
Product Details:
| Size/Diameter | 20mm |
| Material | Mild Steel |
| Length | 6 meter |
| Usage/Application | Industrial |
| Material Grade | Inconel 718 |
| Country of Origin | Made in India |
Inconel 718 Round Bar is a nickel chromium alloy bar that has up to 55% nickel in the composition. The content includes 17% chromium, 4.9% niobium, 6.6% iron minimum and aluminum, boron, carbon, cobalt, copper, manganese, phosphorus, lead, sulfur and silicon. The Inconel 718 Flat Bar and other types of bars also have tantalum and titanium for stabilization.
The material has 1375MPa ultimate tensile strength and 1100MPa minimum yield strength. There are different types such as the Inconel 718 Hex Bar, square bar, rod, round bar and flat bar. All these types have specific application purposes and have slightly different mechanical properties. The 2.4668 Alloy 718 Rod is durable, ductile and highly corrosion resistant. It is used in gas turbines, valves in subsurface safety tools, industrial grade fasteners, thrust reverser components and in aircraft engines. Micro Metals is a leading manufacturer and hold a large ASTM B637 UNS N07718 Bar Stock to cater any order size from the customers.
The material has good weldability, formability, high oxidation resistance and high durability in elevated temperatures up to 1300F. The UNS N07718 Bright Bar also has great cryogenic performance. This is one of the reasons why the material is used in highly thermally fluctuating applications. Please contact us for more information on the products such as the Inconel 718 Square bar and other types along with the price list.
Inconel 718 Round Bar Standard Specifications
| International Specifications | AMS 5663, AMS 5662, ASTM B637, AMS 5664, AMS 5832, ASME SB637, AMS 5962, AMS 5914, NACE MR-01-75 |
|---|---|
| Grade | ASTM B637 Inconel 718, Nickel Alloy 718, UNS N07718, |
| Common Trade Names |
|
| Hex Bar | 2 milimeter to 100 milimeter A/F |
| Flat bar | 2 milimeter to 100 milimeter Thickness |
| 10 milimeter to 500 milimeter Width | |
| Channel Bar | section; 5 to 6 thick, 80 x 40mm to 150 x 75mm |
| Round bar | Diameter: 3-~800mm |
| Square bar | 4 to 100mm |
| Section | 3 to 12 mm thick. |
| Rectangles | 33 x 30 to 295 x 1066 |
| Billet | 1/2″ to 495 Dia. |
| Angle bar | 3*20*20~12*100*100 mm |
| Hollow Bar | 32mm Outside Diameter x 16mm Inside Diameter to 250mm Outside Diameter x 200mm Inside Diameter |
| Tolerances | K12, H9, H8, H11, H13K9, K10, K11, H10, H12 or custom |
| Form | Flat Bar, Hollow, Round, Square, Triangle, Rectangle, I/H Bar, Half Round Bar, Rod, T-Bar, Precision Ground Bar, Hex (A/F), Blocks, Channel Bar, Billet, Threaded, Round Rod, Profiles, Ingot, Rings, Forging etc. |
| Technique | Hot Rolled, Cold Drawn, Rod, Forged Round Bar, Cold Rolled |
| Condition | annealed, Hardened & tempered |
| Surface | Bright, Cold Drawn, Hot Rolled Pickled, Sand Blasting Finished, Polished, Hairline |
Product Details:
| Size/Diameter | 20mm |
| Material | Stainless Steel |
| Length | 3 meter |
| Usage/Application | Industrial |
| Material Grade | Inconel 600 |
| Country of Origin | Made in India |
These Hex Bar are made of using Finest Nickel Alloys. These Inconel 625 Hex Bar are essentially used as a Connector between the bar at the middle. They are also used as a plug in to resist pressure in Pressure Valves. These have huge demand in many large scale industrial purposes. Our Inconel 625 Hex Bar are one of the best selling known for its durable leak-proof property.
Our teams of talented professionals are dedicated towards managing the production and export of Inconel 625 Hex Bar Products in a wide range. With abundant technical manpower support, we manufacturer these Inconel 625 Hex Bar with utmost care on the quality of the product. We are an ISO 9001:2008 registered company, and have been recognized as one of the world’s leading stockists and manufacturer of quality metals for over two decades and are committed to quick responses, unsurpassed quality, competitive pricing, reliable deliveries and an exhaustive inventory.
Product Details:
| Minimum Order Quantity | 10 Kg |
| Size/Diameter | 20mm |
| Material | Mild Steel |
| Length | 6 meter |
| Usage/Application | Industrial |
| Material Grade | Inconel 625 |
| Country of Origin | Made in India |
Incoloy is an alloy that belongs to a class of high performing Inconel metals. Since they are high-performance alloys, the properties of an Incoloy 800HT Round Bar will range between good to excellent. Usually, the preference of Incoloy alloys are in those applications which require stable, yet excellent performance in high temperature settings. This being said, the reason behind the alloys good performance in a heated environment is because of the chemical composition of the ASTM B408 UNS No 8811 hex bar.
Its chemistry boosts the creep resistance to a much higher level as compared to Incoloy 800. Compared to both Incoloy 800 H and alloy 800, the contents of aluminium and titanium in the Alloy 800ht Square Bar is marginally higher, thus improving its behaviour in heated environments. Chromium forms a passivated oxide layer on the surface of the 1.4859 flat Bar, effectively reducing the chances of decay by oxidation. nickel, on the other hand, improves the resistance of Inconel 800HT Round Bar against reductive compounds and halogen containing solutions.
Nickel also aids in better tolerance at elevated temperatures. Properties that supplement the chemistry of Alloy 800HT Round Bar include higher resistance to pitting, resistance to general corrosion, better mechanical and yield strength as well. The demand for Incoloy 800HT Rod is seen in industries that deal with the processing of hydrocarbons including the oil and gas and petrochemical industry.
Incoloy 800HT Rod Specification
| Grade | Incoloy 800HT – UNS N08811 |
|---|---|
| Specification | ASTM B408 UNS N08811, AMS 5766 |
| Round bar size | Diameter: 3-~800HTmm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Round Bar Standard Dimensions | Diameter / Height: |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
| Technique | Incoloy 800HT Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Processing | Bar cutting to 650mm |
| Form | Incoloy 800HT Welding Rod,Channel Bar, Forging, Precision Ground Bar, Flat Bar, Round, Rod, T-Bar, Square, Blocks, Round Rod, Rings, Hollow, Threaded, Half Round Bar, Profiles, Triangle, Rectangle, Hex (A/F), Billet, Ingot, I/H Bar etc. |
| Our stockyad location for fast delivery across India | Shivamogga, Agra, Ahmedabad, Mumbai, Dhanbad, Thiruvananthapuram, Bengaluru, Tiruchirappalli, Pune, Noida, Tirunelveli, Bhubaneswar, Chennai, Coimbatore, Pimpri-Chinchwad, Hyderabad, Navi Mumbai |
| Our Incoloy 800HT Round bar conforms to NACE MR0175/ISO 15156 | |
Product Details:
| Size/Diameter | 20mm |
| Material | Mild Steel |
| Usage/Application | Industrial |
| Length | 6 meter |
| Material Grade | Inconel 625 |
| Country of Origin | Made in India |
Inconel 625 Round Bar is made up of a material consisting of 58% nickel, 20% chromium, 5% iron, manganese, silicon, 8% molybdenum, cobalt, aluminum, titanium, niobium, tantalum, phosphorus and sulfur. Micro Metals is a leading manufacturer and supplier of the Inconel 625 Flat Bar and other types in various dimensions and sizes. The bars can come in different conditions such as hardened and tempered, annealed or precipitation hardened.
The Inconel 625 Hex Bar can be polished, slit rolled, cold drawn, bright drawn, cold finished, smooth turned or peeled and reeled. The different finishes of the different types of 2.4856 Alloy 625 Rod can help in the corrosion resistance and strength of the products. The material has very high strength values up to 517MPa minimum yield strength and 930MPa minimum tensile strength. The ASTM B446 UNS N06625 Bar Stock is available with us and we can supply any size of order instantly. Our prices are competitive to the market.
The outer diameters of the bars range from 32mm to 250mm depending on the application requirements. The different finishes such as the UNS N06625 Bright Bar are used in marine, sea water, chemical, petrochemical, heat exchanger, oil and gas and acid production industries. Please contact us with your Inconel 625 Square bar orders and more information and pricing.
Material Standards And Grades Of Inconel 625 Round Bar
| Solid Rod | ASME SB 466, ASTM B 446, VdTUV 499, ISO 9723, EN 10095, SME Code Case 1935, DIN 17752, BS 3076 NA21 |
|---|---|
| Solid Bar | ASME Code Case 1935, ASME SB 466, ISO 9723, AMS 5666, ASTM B 446, BS 3076 NA21, VdTUV 499, DIN 17752, EN 10095, |
| Forging Stock | DIN 17754, ASME SB 564, SME Code Case 1935, AMS 5666, ASTM B 564, ISO 9725, |
| International Specifications | VdTüV 499, ISO 9723, ISO 9724, BS3076NA21, EN 10095, ISO 9725, DIN 17752, DIN 17754, DIN 17753, WERKSTOFF Nr 2.4856 |
|---|---|
| Grade | Inconel 625 – Nickel Alloy 625, ASTM B446, UNS N06625, AMS 5666, AMS 5837 |
| Specification of Bar | ASTM B 446, AMS 5666, ASME SB 466, VdTUV 499, ISO 9723, EN 10095, BS 3076 NA21, ASME Code Case 1935, DIN 17752 |
| Specification of Rod | ASME SB 466, ASTM B 446, VdTUV 499, ISO 9723, EN 10095, BS 3076 NA21, SME Code Case 1935, DIN 17752 |
| Hex Bar | 2-100mm A/F |
| Flat bar | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Channel Bar | section; 5.0 to 6.0 thick, 80 x 40mm to 150 x 75mm |
| Round bar | Diameter: 3-~800mm |
| Square bar | 4 to 100mm |
| Section | 3 to 12 mm thick. |
| Rectangles | 33 x 30 to 295 x 1066 |
| Billet | 1/2″ to 495 Dia. |
| Angle bar | 3*20*20~12*100*100 mm |
| Hollow Bar | 32mm Outside Diameter x 16mm Inside Diameter to 250mm Outside Diameter x 200mm Inside Diameter |
| Form | Flat Bar, Hollow, Round, Square, Triangle, Rectangle, Half Round Bar, Rod, T-Bar, Precision Ground Bar, Hex (A/F), Blocks, Channel Bar, Threaded, Round Rod, Billet, Profiles, I/H Bar, Ingot, Rings, Forging etc. |
| Technique | Hot Rolled, Cold Drawn, Rod, Forged Round Bar, Cold Rolled |
| Condition | annealed, Hardened & tempered |
| Surface | Bright, Cold Drawn, Hot Rolled Pickled, Sand Blasting Finished, Polished, Hairline |
Product Details:
| Thickness (Inches) | as per std / customize / requirement |
| Material | Nickel |
| Size (inches) | as per std / customize / requirement |
| Size | Customized |
| Type | Sheets |
| Elongation | as per std / customize / requirement |
List of countries/Where we export and supply from last 25 years –
India, Canada, Angola, Argentina, Austria, Azerbaijan, Peru, Chile, Yemen,
Saudi Arabia, Bangladesh, United States, United Arab Emirates, Hong Kong, Croatia,
Czech Republic, Estonia, South Africa, Nigeria, Mexico, Turkey, Spain, France, United Kingdom,
Indonesia, Singapore, Taiwan, Gabon, China, Finland, Greece, Italy, Japan, Hungary, Israel, Iran,
Kuwait, Mexico, Malaysia, Nigeria, Serbia, Algeria, Belarus, Belgium, Afghanistan, Bahrain,
Portugal, Switzerland, Libya, Romania, Thailand, Bhutan, Netherlands, Brazil, Colombia, Ghana,
Iran, Bolivia, Bulgaria, Slovakia, Vietnam, Qatar, New Zealand, Sweden, Trinidad & Tobago,
Tunisia, Ukraine, Kenya, Lebanon, Morocco, Iraq, Jordan, Kazakhstan, South Korea, Sri Lanka,
Lithuania, Mongolia, Russia,
List of city we supply from last 25 years –
Mumbai, Thane, Navi Mumbai, Pune,New Delhi, Bengaluru, Chennai, Surat,
New York, Caracas, Howrah, Sydney, Ahvaz, Algiers, Pimpri-Chinchwad,
Vadodara, Kolkata, Gurgaon, Ahmedabad, Chiyoda, Ankara, Ho Chi Minh City, Bhopal,
Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Tehran, Calgary, Noida, Riyadh, Vung Tau,
Al Khobar, Atyrau, Lagos, Ulsan, Faridabad, Houston, Hanoic, Toronto, Hong Kong,
Rajkot, Brisbane, Los Angeles, London, Muscat, Edmonton, Busan, Mexico City, Doha,
Jeddah, Manama, Montreal, Thiruvananthapuram, Milan, Moscow, Dallas, Coimbatore,
Jakarta, Istanbul, Bangkok, Kuwait City, Sharjah, Petaling Jaya, Ernakulam, Visakhapatnam,
Ludhiana, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur,
Rio de Janeiro, Dammam, Secunderabad, Gimhae-si, Haryana, Colombo, Bogota,
Melbourne, Madrid, La Victoria, Granada, Courbevoie, Courbevoie, Port-of-Spain,
We are also looking forward for a distributer from any of countries for our products , if any client is interested we can visit and complete the deal.
Additional Information:
Product Details:
| Plate Type | Thin sheet, Inconel Plate, Nickel Plate |
| Standard | as per std / customize / requirement |
| Steel Grade | as per std / customize / requirement as per std / customize / requirement as per std / customize / r |
| Temperature | as per std / customize / requirement |
| Inconel | as per std / customize / requirement |
| Size | As Per Requirement |
Our sheets, plates and coils are made of nickel alloy plates & sheets, stainless steel & duplex steel plates, carbon steel & alloy steel plates and sheets. They are used in a range of applications like structural and mechanical & general engineering purposes. They are designed to withstand tremendous amount of weights and pressure.
Our plates, sheets and coils are testimonials of our quality standards. Our range consists of sheets, plates & coils chequered plates, steel chequered Plates and more.
Range: 0.5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75.
Grades:-
List of countries/Where we export and supply from last 25 years –
India, Canada, Angola, Argentina, Austria, Azerbaijan, Peru, Chile, Yemen,
Saudi Arabia, Bangladesh, United States, United Arab Emirates, Hong Kong, Croatia,
Czech Republic, Estonia, South Africa, Nigeria, Mexico, Turkey, Spain, France, United Kingdom,
Indonesia, Singapore, Taiwan, Gabon, China, Finland, Greece, Italy, Japan, Hungary, Israel, Iran,
Kuwait, Mexico, Malaysia, Nigeria, Serbia, Algeria, Belarus, Belgium, Afghanistan, Bahrain,
Portugal, Switzerland, Libya, Romania, Thailand, Bhutan, Netherlands, Brazil, Colombia, Ghana,
Iran, Bolivia, Bulgaria, Slovakia, Vietnam, Qatar, New Zealand, Sweden, Trinidad & Tobago,
Tunisia, Ukraine, Kenya, Lebanon, Morocco, Iraq, Jordan, Kazakhstan, South Korea, Sri Lanka,
Lithuania, Mongolia, Russia,
List of city we supply from last 25 years –
Mumbai, Thane, Navi Mumbai, Pune,New Delhi, Bengaluru, Chennai, Surat,
New York, Caracas, Howrah, Sydney, Ahvaz, Algiers, Pimpri-Chinchwad,
Vadodara, Kolkata, Gurgaon, Ahmedabad, Chiyoda, Ankara, Ho Chi Minh City, Bhopal,
Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Tehran, Calgary, Noida, Riyadh, Vung Tau,
Al Khobar, Atyrau, Lagos, Ulsan, Faridabad, Houston, Hanoic, Toronto, Hong Kong,
Rajkot, Brisbane, Los Angeles, London, Muscat, Edmonton, Busan, Mexico City, Doha,
Jeddah, Manama, Montreal, Thiruvananthapuram, Milan, Moscow, Dallas, Coimbatore,
Jakarta, Istanbul, Bangkok, Kuwait City, Sharjah, Petaling Jaya, Ernakulam, Visakhapatnam,
Ludhiana, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur,
Rio de Janeiro, Dammam, Secunderabad, Gimhae-si, Haryana, Colombo, Bogota,
Melbourne, Madrid, La Victoria, Granada, Courbevoie, Courbevoie, Port-of-Spain,
We are also looking forward for a distributer from any of countries for our products , if any client is interested we can visit and complete the deal.
Additional Information: